The EPB44HDG welded base embeds in wet concrete at time of pour and supports a 4 in. x 4 in. post. This connector was designed to help resist uplift forces.

Gives the code required 1 in. standoff when properly installed

Extra nail holes may be filled for extra strength

Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports)

Hot-dip galvanization offers extra corrosion resistance for exterior and treated-wood applications

Install with (8) 16d common nails or #10 x 1-1/2 in. Strong-Drive SD screws